9153 Duarte Road, San Gabriel, CA 91775 Phone 626.292.1617
Radios
Robbe F-14 Navy Marine Radio ON SALE!!
The F-14 is now better than ever! Uses 4 "AA" disposable batteries (not included) in the receiver's battery tray for strong 6 volt powered reception.
The expandable marine radio system. The F-14 Navy is a multi-option radio with a 6-channel transmitter capable of being expanded to 8 channels. It features an RF frequency modulation high-output transmitter, servo reverse, programmable function sequencer, Navy Twin-Stick, adjustable stick, 2 F1600 slider switches, integrated antenna compartment, charge socket, and single-point neckstrap support. The large battery compartment allows for batteries up to 3000mAh, giving more than 15 hours of operation time. The built-in Navy Twin-Stick is a fully proportional double control unit with fine trims for both channels. It is a great choice for controlling twin-engined model boats and for the separate control of mainsail and jib in sailing boats. A substantial range of expansion modules make it the most versatile marine radio available. Various multi-switch, multi-prop, or multi-switch-prop module channel extensions can expand this radio up to 104 functions. Set contains F-14 transmitter with built-in Navy Twin-Stick,Two slider switches,One Standard Stick, A battery Charger, 75MHz, RX775 DF receiver, 75MHz, Servo FS100, Servo accessory bags, 1 pair of crystals and a switch harness.
Note: When using speed controls with BECs. Disable one BEC cable for proper performance.
Futaba Spectrum Radio This radio transmits on 2.4GHz frequency. Never worry about conflicting signals from other transmitters as the transmitter shifts every two milliseconds. Compare this to other systems that use only one or two frequencies.
One transmitter will control any number of boats, cars, aircraft and helicopters. Simply set up each receiver to read the transmitter's signal. Simple set-up step requires only pushing of one button.
Hitec 2 Channel Radio Specs:
-# of Channels: 2
-Modulation: AM
-Band: 75MHz
-Servos: 2 HS311
-Receiver: HP2RNB
NEW!Hobby King 2.4GHz 4 Channel Radio and Receiver We offer this well established and proven radio at a great price. Don't wait weeks for a delivery from Asia. We can ship immediately. Don't get confused by the fuzzy descriptions and stock numbers as seen on the internet. We have selected a model with features that you expect such as left hand throttle stick control and correct additional receivers, if you need more. We have also included instructions for electronically binding the trasmitter and receiver, not offered by Hobby King.
Includes: 4 Channel Radio, Receiver, Binding Plug and Binding Instructins
Required Accessories Not Included with the Radio Set 2-Wire Receiver Switch
AA Receiver Battery Holder Three packs required for transmitter and receiver.
AA Alkaline Battery 4/Pack
Additional Receiver **Not Required
Hitec 4 Channel Radio Created for the avid boat, sophisticated multi function surface vehicle modeler or the emerging robotic hobbyist, the Laser 4 FM radio is a great choice for a surface transmitter! This 75mHz radio features 4-channels, servo reversing, channel 1 and 2 mixing, plus many more options!
4 Channel 75 MHz FM Transmitter
Channel 1 and 2 Elevon Mixing
5 LED Battery Power Meter
Low Battery Alarm
Transmitter With Supreme 8 Channel Dual Conversion 75MHz Receiver, 2 HS-322 Servos, With Rechargeable Transmitter Batteries, AC Charger and "Dry" Battery Box
Hitec 6 Channel Radio Designed for the dedicated boat, sophisticated multi function surface vehicle modeler or the emerging robotic hobbyist, the Laser 6 FM radio is a great choice for a surface transmitter! This 75mHz radio features 6-channels, servo reversing, channel 1 and 2 mixing, plus many more options!
6 Channel 75 MHz FM Transmitter
ATV’s Channels 1 and 2
EPA on Channel 3
Channels 2 and 4 Mixing Function
Transmitter with Supreme 8 Channel Dual Conversion 75MHz Receiver, 2 HS -322 Servos, with Rechargeable Transmitter Batteries, AC Charger and "Dry" Battery Box
Dual Electronic Switch This miniature solid state switch will control two devices using one channel. Switching can be momentary on or toggle on.
1 1/2" x 1 1/2" x 3/4"H
Multi-Switch 16 Module (Expansion Module for F-14 Navy Radio)
This module is designed for controlling auxiliary functions, and expands one proportional channel on the transmitter to provide 16 switched functions.
To be used in conjunction with the ROB8369 decoder (Below).
Multi-Switch 16 Decoder Memory For each Multi-Switch module in the transmitter you need one decoder at the receiver end.
This takes up only one servo channel, and can switch 16 channels directly. Operating voltage 4.8 - 24 Volts, up to 1.8 A per output.
Now with Memory Function: both channels assigned to a single switch can be turned on simultaneously. The memory function can be switched off at any time.
The Multi-Switch 16 decoder can also process the switched functions of the 8-channel module, but can only control 8 channels in this configuration.
The output stage of this decoder features protection against short-circuit, reverse polarity and overheating, making it virtually indestructible. Set supplied without connecting leads.
Multi-Switch-Prop Module (Expansion Module for F-14 Navy Radio) Optional module for controlling auxiliary functions; expands one proportional channel on the transmitter to provide 12 switched functions and 2 proportional servo channels.
This is a combination module which covers most requirements. To be used in conjunction with the ROB8370 decoder (Below).
Multi-Switch-Prop 12+2 Decoder Memory For each Multi-Switch module in the transmitter you need one decoder at the receiver end. This takes up only one servo channel, and can switch 12 channels directly as well as providing 2 servo channels. Operating voltage 4.8 - 24 Volts, up to 2.7 A per output.
Now with Memory Function: both channels assigned to a single switch can be turned on simultaneously. The memory function can be switched off at any time.
The Multi-Switch-Prop decoder can also process the switched functions of the 8-channel and 16-channel modules.
The output stage of this decoder features protection against short-circuit, reverse polarity and overheating, making it virtually indestructible. Set supplied without connecting leads.
Multi Switch Module This module is designed for controlling auxiliary functions, and expands one proportional channel on the transmitter to provide 8 switched functions.
Multi-Prop 8 Module This module is designed for controlling auxiliary functions, and expands one proportional channel on the transmitter to provide 8 proportional functions. It provides accurate, simultaneous control of 8 channels. To be used in conjunction with the ROB8042 (Below).
Multi-Prop 4+4 Module The same as the above module, but with 4 switches and 4 rotary controls.
Ideal for all applications where your transmitter lacks one proportional channel, e.g. for bungee release, retracts, jettison mechanism, airbrakes etc. To be used in conjunction with the ROB8042 (Below).
Multi-Prop 8 Decoder For each Multi-Prop module in the transmitter one decoder is required at the receiver end.
Multi-Module Cover Plate F-14 Cover plate with legend area, fits lower transmitter option well. For modules with 6 or 8 controls.
Dual Rate Module F-14 Provides variable reduced travel on 2 control functions; range 30-100%. Requires mixer switch ROB F1502 (not included) ROB F1541
Genoa Module F-14 Auxiliary module for F-14 transmitter, provides a convenient method of controlling the Genoa foresail. This module makes sail control much easier, especially when going about or gybing, as it automatically assumes the trim values for turning manoeuvres.
One linear slider, No. F1601, is also required to act as trim.
Transistor Reverser If you connect this unit to the Multi-Switch decoder No. 8884, a motor drawing up to 1 A can be controlled over the functions forward - stop - reverse. Specs: Weight: 15 g Voltage: 6 - 12 (über Multi Switch-Decoder) Volts Dimensions: 3/4" x 1 1/16" Switched current: max. 1 A
Mono Switch Electronic switch for momentary functions, such as foghorn, Martins horn etc. Specs: Weight: 18 g Voltage: 4.8 to 6 Volts current: 24 mA Dimensions: 2" x 1 11/16" x 9/16"
Relay Module Switch relay with connecting lead for Multi-Switch Decoders, increasing the decoder´s switching capacity to 16 A. Suitable for switching high-current auxiliary working systems such as pumps, electric motors etc. Specs: Weight: 18 g Voltage: 6 to 12 Volts current: 16 mA
Dimensions: 2 3/8" x 15/16" x 3/4"
Relay Reversing Module Double switch relay to be used with Multi-Switch decoder. Functions: stop (both open or closed), forward (relay 1 closed), reverse (relay 2 closed). Max drive current 16A.
Voltage Regulator Throw away your receiver battery pack and power your receiver from the main drive battery using this solid state device. Providdes 5 volts to the receiver from a 12 volt battery.
