Now you can own a high quality precision made brass steam engine and boiler at a reasonable price. These power plants from Saito are totally assembled and require no additional machine work or finishing.

Not a toy powered by short running "pellets", the Saito powers plants have high torque and run easily in both forward and reverse for 20 to 30 minutes on one boiler full of water. Multiple cylinders allow for easy starting the burners use methanol alcohol. Designed to shut down before the boiler runs dry.

A high pitch prop turning at low 500 to 800 rpm, is the key to successful steam propulsion. The two cylinder engine will easily turn a 2.5", prop with a high 2.75" pitch. This set up will work for boats of up to 40" in length.

The three cyliner engine will turn a 4" prop with a 4.5" pitch for especially large boats.

Nervous about getting into all this "monkey motion" business compared to a simple electric motor? Why use a multiple cylinder engine instead of a cheaper one-cylinder job? What in the world is a "slide valve" engine? What are the benifits of a 3 cylinder over a 2 cylinder engine?

Saito T-2 Steam Engine:

2 cylinders, "D" Slide Valve Design, 6000 rpm, No Load, 0.03 Horse Power (aproximate), 4.5" long, 2.75" wide, 4" high, weight: 1.5 lbs.

Recommended Boiler and Burner for 2 Cylinder Steam Engine

Boiler Length 7.5", Boiler Height 5", Boiler Width 3", Burner Length 4.5", Burner Height 3.5", Burner Width 2", Total weightof both units: 2.8 lbs.

Saito T-3 Cylinder Steam Engine

3 cylinders, "D" Slide Valve Design, 5700 rpm, No Load, 0.038 Horse Power (aproximate), 5.75" long, 2.75" wide, 4" high, weight: 2 lbs.

Recommened Boiler and Burner for 3 Cylinder Steam Engine

Boiler Length 8.75 ", Boiler Height 4.75 ", Boiler Width 2.75 ", Burner Length 5", Burner Height 3", Burner Width 2.25 ", Total weightof both units: 2.8 lbs.