 |
HIGHLY DETAILED TOWING WINCH
This item comes as a kit.
Dimensions:
4-3/4" x 3-3/4" x 2-3/4" (120 x 96 x 70 mm) |
|
 |
Plastic/Metal Anchor Winch
2 5/8 x 1 3/4 x 1" |
|
 |
Plastic/Metal Net Winch
4 15/16 x 2 13/16 x 1 3/4" |
|
 |
Plastic/Metal Net Winch
3 9/16 x 1 3/4 x 1 3/4 " |
|
 |
Plastic/Metal Net Winch
3 7/16 x 1 3/16 x 1 7/16" |
|
 |
Telescoping Crane
Crane kit includes printed plastic and metal parts, crane base and hydraulic piping, wire, plastic tubing; assembly instructions, drawings. The crane can be built, folded or extended.
Extended Max. Reach Approx.: 9.8"
Folded Max. Height approx.: 5.5" |
|
 |
HIAB FOLDING SEACRANE
Scaled in 1/24, this kit contains over 100 parts including cast metal parts & printed styrene sheets.
A very detailed addition to your 1/24 scale boat. |
|
 |
SHIPS CRANE
Suitable for tug boats and similar models. Finely detailed true-scale design. It rotates horizontally and vertically. The crane hook can be raised and lowered. Consists of 13 different injection-moulded parts.
Scale: 1:50
Boom: 6.5" (165mm) |
|
|
Plastic Styrene Crane Kit
(HARBOR MODELS EXCLUSIVE)
This kit is now offerd only by Harbor Models with laser cut plastic parts. No more tedious cutting of silk-screened plastic with a straight edge and knife. No more drilling of numerous tiny holes for hydraulic line holders. Acurracy to .001". Construction is simplfied and efficient.
You will be pleased with the numerous cast metal parts that include hydraulic pistons, hook, hydraulic hoses and pipe. and contorl box with levers. Moveable boom arms but not an RC function.
Boom: 6 1/8" (156mm)
Base: 2" (51mm) |
|
 |
The Slip FK9 Crane built by Mr. Harold Goellner using the Harbor Models Laser Cut Version installed on his Mr. Darby. "It was a real pleasure building this detailed crane." - Harold Goellner |
 |
Crane
Different loads can be raised and lowered with this crane (e.g. letting an inflatable boat down to the water). Suitable for the W3 police boat and others.
Scale 1:25
Boom: 6 1/8" (156mm) |
|
 |
Crane
The semi-scale model crane is assembled from two injection-molded components, and is very easy to make and fit. It rotates horizontally and is fitted with a crane hook which can be raised and lowered. It can be used in many types of model.
Scale 1:25
Boom: 4 1/2" (114mm) |
|
 |
Towing Bridle Winch
This finely detailed towing bridle winch can be installed into models in such a way as to be fully functional. The kit, which consists of approximately 80 separate parts, contains all the parts shown, including the base plate, chain and chain wheel.
Scale 1:25
Width: 7 1/16" (180mm)
Length: 3 15/16" (100mm) |
|
 |
Anchor Winch
Finely detailed kit.
Scale 1:25. |
|
 |
Anchor Winch
Set for yachts.
Scale 1:25. |
|
 |
Steam Powered Winch
3" x 23/16" x 1°" |
|
 |
Anchor Winch
3 1/4"x 63(2 1/2"x 2" Kit-form (PARAT and similar) |
GR372
$21.95
|
