 |
Fire Monitor
2 x 1 3/4"
2/Pack
Plumbed for operation. Includes two styles of tube connectors
Works well with 1/8" tubing found below. |
|
 |
Fire Monitor
Working monitor, unassembled.
74 x 62 x 20 mm. ( 2.93 x 2.44 .79 inches)
Works well with 1/8" tubing found below. |
|
 |
Fire Monitor
Swivels horizontally and vertically
1/Pack
5.9" High
1:10 Scale
Works well with 1/8" tubing found below. |
|
 |
Fire Monitor
Semi-scale model of a fire-fighting cannon. Like the original, it rotates in the vertical and horizontal planes. Made of plastic injection-moldings and metal tubes, which makes assembly very easy. Suitable for many models.
Scale 1:25
Works well with 1/8" tubing found below. |
|
 |
Fire Monitor
Semi-scale, fully operational fire monitor. Set includes all necessary control elements..
Scale 1:25
Works well with 1/8" tubing found below. |
|
Fire Monitor Accessories
We have selected and tested the best accessores to give you maximum performance with your fire fighting equipment. Our prices are highly competitive and all items are in stock. All items work with the fire monitors listed above. |
 |
Electric Geared Pump 6 Volt
With a range of up to 8 m the robbe-geared pump is ideal for supplying water to the fire monitors in boats.
Dimensions: 60 x 40 x 30 mm
Pumping capacity: 16 Gallon/Hour |
|
 |
Sulivan 12 Volt Pump
Includes reversing switch to clear cloged tubing.
Pumping capacity: 15.5 gal/hr
1-1/2" x 3-1/2" x 3-1/2" |
|
 |
Silicon Tubing
1/8" Inner Diameter.
Very strong yet flexible.
Grabs onto nipples and won't let go.
Fits 1/8" and larger nipples. |
|
 |
Water Pick-up
Fits through the bottom of the hull. Aluminum fixture with retaining nut makes for a smooth finished look.
Accepts 1/8" Tubing |
|
 |
"Y" Connector With Barbs.
Easily connect two fire monitors to one pump. The "Y" style assures even distribution of water with no back pressure build-up.
1/8" O.D.
1/2" x 1/2" x 1/2" |
|
 |
CONTROL ACCESSORIES SIMPLY AND EASILY
These relay switches are easy to install and will allow you to turn on and off accessories that draw more amperage or voltage than your radio receiver battery can supply. Simply plug the relay into an available receiver port , connect the power supply to the switch and the power output to the accessory. Control the switching on a joystick or other radio transmitter switch. Control smoke generators, sound modules, water pumps, and multiple lights, for example. Includes an LED indicating power on status that also flashes when radio link is weak. |
Single Relay Switch
This is a single pole, double throw switch that will control any number of accessories drawing a total of 10 amps from any hobby battery, connected to one circuit.
SPECIFICATIONS:
Maximum current: 10Amp @ 28 VDC
Dimensions: 1.25" X 1.25" X 0.9"
Twelve inch servo pigtail |
|
Double Relay Switch
This a double pole, double throw switch that will control two separate power sources and amperages. Activation of this switch will power up both outputs at the same time. . INDIVIDUAL CONTROL OF THE TWO POWER OUTPUTS IS NOT POSSIBLE.
SPECIFICATIONS:
Maximum current: 8AMP @ 12VDC
Dimensions: 1.65" X 1" X 0.72"
Twelve inch servo pigtail |
|
