 |
Graupner Motors Speed 400
Highly efficient, small motor for medium-sized boats. 1" x 1", 2.3 mm shaft, 3.6-8.4V
Specification:
Shaft 2.3mm
Length, excl shaft 1.5"
Case diameter 1"
No load RPM: 16400 |
|
 |
Motor Mount Speed 400 Motor |
|
 |
RACE 400, 6V GEARED MOTOR
3:1 Reduction
No Load RPM: 16400
Total Length: 3 1/4"
Shaft Length: 3/4"
Height:1 1/4"
Width: 1 1/5"
Shaft: 4mm |
|
 |
Direct MFA COMO Drive 500 Size Motor
This high quality motor comes with motor mount, noise suppression compacitors and 1/8 inch (2.3mm) drive shaft |
|
 |
Robbe Geared Motor
5.5:1 12Volt
4mm Shaft |
|
Robbe Geared Motor
3.3:1 6Volt |
|
 |
Motor Mount For Robbe Geared Motors |
|
 |
Navy Compact Motor
High performance geared drive system for model boats. Simple to install. Set contents: complete with electric motor, propeller shaft, 3.3:1 geared reduction and 45mm propeller(6Volt) |
|
 |
MFA 500 Motors with Gear Reduction
This miniature gearbox is of steel and brass construction with brass gears and is mounted on a 1mm think steel bracket. It incorprates a high quality three pole motor with sintered-bronze bearings. The design and construction of the unit make it suitable for a host of model and light industrial applications
6mm Drive Shaft
Three Gearing Options:
MFA16 - 2.5:1 Gearbox
MFA7 - 6:1 Gearbox - 1316rpm @ 6v, 2633 @ 12v
MFA4 - 11:1 Gearbox - 1436 @ 12v |
|
 |
Speed 600 ECO 7.2V
Operating voltage range 6... 9.6V
No-load RPM 11000
Current drain at max. Efficiency 7.5 A
Length of case. excl shaft 2 1/4
Diameter 1.45"
Shaft Diameter 3.2mm (1/8") |
|
|
|
Motor Mount Speed 600 Motor |
|
 |
SPEED 700 BB Turbo 12 V
Ballraced motor with internal fan. Suitable for POWER GEAR 2:1 and direct drive.
Specification:
Nominal voltage 12 V
Operating voltage range 7,2 ... 19,2 V
No-load rpm 11600 min–1
No-load current drain 2 A
Current drain at max. efficiency 12,5 A
Current drain when stalled 43 A
Max. efficiency without gearbox 75 %
Length of case, excl. shaft 67 mm
Diameter 44 mm
Free shaft length 14 mm
Shaft diameter 5 mm
Weight 350 g |
|
 |
Motor Mount for 700 Motor |
|
 |
800 Direct Drive Motor
Top RPM: 5167
Runs on 12 Volts
3 Pole
Maximum amperage draw: 5.28amps
Will efectively propel a 36" deep vee boat with a 2" prop Can also turn props up to 3.5 " @ 2500 RPM
Motor mount included.
Overall Length: 4 1/4"
Can Length: 3"
Can Diameter: 2"
Drive Shaft Diameter: 1/4"
Drive Shaft Length: 1/2" |
|
 |
High Torque Motor with Belt Drive
For the bulider who likes the larger tugs and merchant ships that require big props and lots of torque. The 800 size motor is matched to a sophisticated toothed belt drive drive rpm reduction system. This unit produces 2460 rpm at 12 volts with 2.1 times increased torque and 2:1:1 speed reduction. Requires 6mm coupler. Comes with assembly and mounting instructions.
 |
|
 |
JOHNSON HC970
|
|
JOHNSON HC970 Motor Mount
This professional designed motor mount was specifically manufactured for the Johnson Motor and will provide your motor with a secure position in your hull. |
|
 |
SPEED 900
Ideal for powering Graupner Z drive.
High torque
12Volt
2 x 3"
6mm Shaft
8 amp current draw at maximum efficiency, 54 amp lock. |
|
 |
DUMAS 6 VOLT OR 12 VOLT MOTOR
5000 rpm no load speed. Includes couplings, rod & bracket.
DUM2004 - 6 Volt
DUM2005 - 12 Volt |
|
 |
ROBBE MINI GEARED MOTOR
Compact, low-weight precision DC motors with gearbox for special auxiliary functions in model boats, e.g. anchor winches, radars, guns, cranes etc. Extremely low-noise operation due to the maintenancefree, self-lubricating sinter bearings. The motors are supplied with mounting screws and a plastic motor casing for dirt-free and low noise operation.
Available in four ratios. 150 rpm, 50rpm, 26rpm, 16rpm (Best speed for radarhead rotation).
Length: 23.5mm (15/16")
Width: 15mm (9/16")
Shaft: 2mm |
|
 |
ALL NEW! Ultra Miniature Precision Planetary Motor
-Total Length: 29mm
-Diameter: 8mm
-Drive Shaft Diameter:
1.5mm
-20 RPM
-Perfect for radar head rotation
-High torque, great for anchor winches
-Nylon drive shaft
-Available for immediate shipment |
|
 |
Miniature Motor Mount |
|
 |
Noise Suppression Capacitor
Reduce possible static electricity discharge from motors affecting radio transmisson reception.
Package of 3 capacitors with instruction diagram.
|
|
 |
3 Volt Battery Holder
Comes with switch and positive and negative leads. |
|
 |
Como Large Geared Motor
1.5-4.5V geared motor has removable gears to produce ratios of 4:1 to 4,096:1.
Size: 2" x 2°" x 1". |
|
 |
Rudder and Motor Mixer Control Unit
Automatically control the relative speed of two motors on your boat to achieve extremely sharp turns. As the rudder stick on the radio transmitter is pushed to a greater degree, the motors will change speed to pull/push the boat. Extreme rudder movement will cause the inboard motor to reverse for a tight turn.Works in both forward and reverse.
This solid state, micro processor works with any radio system and speed controls.
Output connectors provided for the rudder servo and speed controls. Must have 2 speed controls to work.
Includes LED power on indicator lamp.
Case size: 1. x 1.26 .79"
|
|
