2.4GHZ Receiver for F-14
This built-in switch expands the Robbe Futaba transmitters F-14 with a 3-stage switching channel (on-off-on).
The connection is preferably made to channels 5-8.
The installation in the transmitter is not a problem even for the inexperienced.
This unit installs into the middle of the F-14 giving the radio an extra proportional channel. Great for controlling bow thrusters, turning winches, cranes or searchlights that require proportional control.
The F-14 can use two of these and install easily by just two screws and a plug onto the motherboard of the radio.
Use this unit to expand the F-14 transmitter with 12 more switches and two more proportional channels. Switches come in a variety of 3 way, momentary and latching. Very easy to install, no soldering or calibrating required, simply plug and play, instructions are included for this process.
Must be used in conjunction with RO8370 decoder module.
This decoder module will be plugged into the F-14 receiver to function as the available ports for the 12+2 Module (RO8101).
Must be used in conjunction with 12+2 Module RO8101.
Use this unit to expand the F-14 transmitter with 16 more switches. Switches come in a variety of 3 way, momentary and latching. Very easy to install, no soldering or calibrating required, simply plug and play, instructions are included for this process.
Must be used in conjunction with RO8369 decoder module.
This decoder module will be plugged into the F-14 receiver to function as the available ports for the Switch 16 (RO8084).
Must be used in conjunction with Switch 16 RO8084.
Choose ONYX batteries for the variety and quality to satisfy a wide range of applications — whether you need power for your radio, a replacement battery, an economical upgrade, or packs that will push the performance envelope. These batteries are available with all popular plug types, ensuring compatibility and solid, dependable connections. ONYX prices make every selection a great value.
Number of Cells in Series: 8
Rated Voltage: 9.6V
Maximum Recommended Charge Current: 2.0A
Lead: 22AWG gauge wire with universal connector
Lead Length: 4.7" (120mm) not including connector
Pack Dimensions: 3.9 x 1.1 x 1.1" (100 x 29 x 29mm)
Weight: 7.8oz (220g)
Cell Size: AA
The Prophet™ Sport Ni-MH charger is ideal for sport hobbyists. This affordable, durable and full-powered AC charger can be utilized for surface, air and marine RC charging purposes. With the ability to handle 4 to 8 cell Ni-MH batteries and a range of selectable currents, the Prophet Sport Ni-MH is an asset to any hobby collection. All of this is proudly backed by a Dynamite® 5-year warranty.
This charger will work great to charge the F-14 transmitter battery, you may have to cut the connector off and solder a new one. The female side to a servo extension cable works well for this. You can find those under "Cable and Connectors".
5-Year Limited Warranty
35W charge power output for Ni-MH (4–8C) batteries
High-visibility, simplified user interface
Select charge current from 0.1A to 4.0A with a single push button
0.1A Maintenance Mode Charging for battery repair/recovery
Six red LEDs indicate charging current
Two LEDs (red and green) indicate charging status
Start/Stop a charge cycle with a single button
Audible beep alerts
Removable AC power cord
Short-circuit, over-current, reverse polarity, low input voltage and over-temperature protection
Meets IP33CW, IK07 environmental specs
Rugged industrial plastic case
Input: 100-240V AC, 50-60Hz
# Cells: 4-8
Charge Rate: 0.1A to 4.0A
Input Connector: AC cord, detachable, North American plug
Output Connector: EC3
Battery Type: NiMH
Cooling Method: Fan
Length: 4.33 in (110mm)
Width: 3.54 in (90mm)
Height: 2.05 in (52mm)
Overload Protection: Yes