Length: 3.8"
Depth: .93"
Height: 2"
Weight: .6 lbs
Maintenance-free, rechargeable sealed lead-acid battery. Can be used in any position and can be trickle charged for long periods of time. Excellent for alarms, communications and back-up applications.
WILL NOT LEAK.
Best charged with a .5 to 1 amp charger.

Length: 2.75"
Depth: 1.9"
Height: 4"
Weight: 1.6 lbs
Maintenance-free, rechargeable sealed lead-acid battery. Can be used in any position and can be trickle charged for long periods of time. Excellent for alarms, communications and back-up applications.
WILL NOT LEAK.
Best charged with a .5 to 1 amp charger.

Length: 5.94"
Depth: 1.94"
Height: 3.82"
Weight: 3.6 lbs.
Maintenance-free, rechargeable sealed lead-acid battery. Can be used in any position and can be trickle charged for long periods of time. Excellent for alarms, communications and back-up applications.
WILL NOT LEAK.
Best charged with a .5 to 1 amp charger.

Quick-connect connectors.
Maintenance-free, rechargeable sealed lead-acid battery. Can be used in any position and trickle charged for long periods of time.
WILL NOT LEAK.
Best charged with a .5 to 1 amp charger.

Dimensions:
Width: 3-3/16"
Height: 2-1/16"
Depth: 1-11/16"
Weight: 1.2lbs

Length: 2.75"
Depth: 3.53"
Height: 4.21"
Weight: 3.4 lbs.
Quick-connect connectors. Maintenance-free, rechargeable sealed lead-acid battery. Can be used in any position and trickle charged for long periods of time.
WILL NOT LEAK.
Best charged with a .5 to 1 amp charger.

Length: 6"
Depth: 2.5"
Height: 3.7"
Weight: 5.2 lbs.
Maintenance-free, rechargeable sealed lead-acid battery. Can be used in any position and can be trickle charged for long periods of time. Excellent for alarms, communications and back-up applications.
WILL NOT LEAK.
Best charged with a .5 to 1 amp charger.

Width: 6"
Height: 4"
Depth: 3.88"
Weight: 8 lbs.
Maintenance-free, rechargeable sealed lead-acid battery. Can be used in any position and can be trickle charged for long periods of time. Excellent for alarms, communications and back-up applications.
WILL NOT LEAK.
Best charged with a .5 to 1 amp charger.

This one amp charger is perfect for 12 volt, sealed lead acid batteries. It is designed to fully charge and maintain a battery at proper storage voltage without the damaging effects caused by trickle chargers.
Runs on standard 115ACV.
This unit will charge your Sealed Lead Acid battery at 1 amp per hour. The slow charge assures the battery will not overheat and self destruct.
1 Amp
Includes cables to connect to your battery with alligator clips.

This half amp charger is perfect for 6 volt, sealed lead acid batteries. It is designed to fully charge and maintain a battery at proper storage voltage without the damaging effects caused by trickle chargers.
Runs on standard 115ACV.
This unit will charge your Sealed Lead Acid battery at .5 amp per hour. The slow charge assures the battery will not overheat and and cause damage.
Charging Indicator: Dual color LED shows the status of charging.
Red: charging; green: fully charged
.5 Amp / hr
Includes cables to connect to your battery with alligator clips.

-Voltage Rating: 7.4V
-Rated Capacity: 5200mAh
-Discharge Rating: 50C continuous
-Dimensions: 1.85 x .98 x 5.43" (47 x 25 x 138mm)
-Weight: 8.82oz (250g)
-Discharge Lead/Connectors: Deans
-Balancing Connector: JST-XH
-Watt Hours: 3848Wh

ALWAYS use a LiPo-approved Charger. Never charge the battery unattended.

Choose ONYX batteries for the variety and quality to satisfy a wide range of applications — whether you need power for your radio, a replacement battery, an economical upgrade, or packs that will push the performance envelope. These batteries are available with all popular plug types, ensuring compatibility and solid, dependable connections. ONYX prices make every selection a great value.

Specifications:
Capacity: 2000mAh
Number of Cells in Series: 8
Rated Voltage: 9.6V
Maximum Recommended Charge Current: 2.0A
Lead: 22AWG gauge wire with universal connector
Lead Length: 4.7" (120mm) not including connector
Pack Dimensions: 3.9 x 1.1 x 1.1" (100 x 29 x 29mm)
Weight: 7.8oz (220g)
Cell Size: AA

7.2V, 3600mAh NiMH Battery Pack with Standard Tamiya Connector

-Number of Cells in Series: 6
-Min. Discharge Voltage: 5.4V
-Maximum Recommended Charge Current: 4 amps
-High Power 30amp discharge current
-Pack Dimensions: 5.33 x 1.8 x 0.9"
-Weight: 13oz

7.2V 5000mAh NiMH Battery Pack Standard Tamiya Connector

-Number of Cells in Series: 6
-Min. Discharge Voltage: 5.4V
-Maximum Recommended Charge Current: 5 amps
-Pack Dimensions: 5.47 x 1.89 x 0.98" (139 x 48 x 25mm)
-Connector: 14 AWG Tamiya -Weight: 14.92 oz (423 g)

Wide Compatability: Charges NiMH/NiCd RC car battery pack of 2-10 cells (2.4V, 3.6V, 4.8V, 6.0V, 7.2V, 8.4V, 9.6V, 10.8V, 12V)NOTE: only for recharging NiMH/NiCd batteries, CAN'T USER FOR LiPo /Li-ion/LiFePO4 batteries. Note: Only one battery is allowed to be charged per use, simultaneous charging of multiple batteries is prohibited! (Compatible only with NiMH/NiCd batteries; other types of batteries are not supported.!!)
Charge Safety upgrade-Equipped with an intelligent protection chip, it has overheat protection, overload protection, short circuit protection, and leakage protection.
Smart RC Car Charger Plug-A socket with an AC input voltage ranging from 100V to 240V, which can be used anywhere in the world. The built-in LED light will display different charging situations according to different charging states to help you better understand the charging progress of the device.

Red light = charging
Blue light = charged
Flashing lights = battery fault
**Failure to follow these warnings may result in fire or personal injury.

Input: AC 100-240V

Blue Crimp
16-14 Gauge
Will fit all sealed lead acid batteries on this site.

Red Crimp
16-14 Gauge
Will fit all sealed lead acid batteries on this site.

Yellow Crimp 14-12 Gauge Will fit all sealed lead acid batteries on this site.
Perfect for our Power Panel connections to the battery.

Split your main battery feed right from the terminal. Easily send two power wires to different areas of the hull.
For use with HAR925 Quick Connect

Perfect for main battery wire or thicker gauge wire to components with more current draw. Easily crimp each side to couple wire connections in seconds.

10-12 gauge wire

Save your speed control!

Use this inline fuse holder on the positive side of your ESCs battery connection for safety. Use a fuse that is about 5 amps less capacity than your ESC. That way if the ESC ever asks for more amps than it can handle you lose a $.50 fuse rather than a $50.00 ESC.

Standard Fuse for use in HAR910 fuse holder or any standard fuse holder.
Length: 1-1/4"
Diameter: 1/4"

Choose amperage rating from drop down menu, usually a good method is to use a fuse rated for about 5 amps less than your speed controls. That way if your motor stalls and asks the speed control for more amperage than it can handle you'll lose a $.50 fuse over a $50.00 speed control.

Use this setup to ensure proper rotation with HAR362 Radar Unit.
One AA Battery delivers 1.5 volts.
Switch is included with leads.
AA battery is NOT included.

Comes with switch and positive and negative leads.
Takes 2x AA Batteries to output 3 volts.
Includes an on/off switch on the case

Comes with switch and positive and negative leads.
Takes 2x AAA Batteries.

Takes 4x AA Batteries and will output between 5.5 and 6 volts, depending on AA batteries used.
***Note: Do not use receiver battery packs if you are powering your receiver with a Battery Eliminator Circuit (BEC).

The original Power Distribution Panel is back!

This nifty little gizmo eliminates the need for many different voltage battery packs.
Simple connect the two leads to a 12v power source or battery and the power panel will break down the voltages into the following:
2x 12v for motor ESC connection
2x 6v for motors, lighting or other 6 volt functions
1x 5v for receiver power
2x 3v for lighting or small motors

Each circuit has its own on/off switch so you can determine which functions you want running. There is also a main on/off switch so you can power your entire project with the flip of one toggle. Each circuit has screw terminals for positive and negative and are marked to keep polarity correct.

Dimensions:
Width: 5 1/2" (width mounting tabs) 4 3/8" (just the enclosure)
Depth: 3 1/2" (with the terminal strip)
Height: 2 1/2"

Download Instruction Sheet Here